Operating menu and parameter description
Burst trigger mode
Navigation
Prerequisite:
Description
User entry
Factory setting
Burst trigger level
Navigation
Prerequisite:
Description
User entry
Factory setting
Min. update period
Navigation
110
Expert → Communication → Burst configuration → Burst trigger mode
This parameter can only be selected if the Burst mode option is enabled.
Use this function to select the event that triggers burst message X.
• Continuous:
The message is triggered in a time-controlled manner, at least observing the time
interval defined in the Min. update period parameter.
• Window:
The message is triggered if the specified measured value has changed by the value
defined in the Burst trigger level X parameter.
• Rising:
The message is triggered if the specified measured value exceeds the value in the
Burst trigger level X parameter.
• Falling:
The message is triggered if the specified measured value falls below the value in
the Burst trigger level X parameter.
• On change:
The message is triggered if a measured value of the message changes.
• Continuous
• Window
• Rising
• Falling
• On change
Continuous
Expert → Communication → Burst configuration → Burst trigger level
This parameter can only be selected if the Burst mode option is enabled.
Use this function to enter the value which, together with the trigger mode, determines the
time of burst message 1. This value determines the time of the message.
-1.0e
+20
to +1.0e
+20
-10.000
Expert → Communication → Burst configuration → Min. update period
iTEMP TMT162
Endress+Hauser