Configuration Counter; Sensor N Value; Device Temperature - Endress+Hauser iTEMP TMT162 Operating Instructions Manual

Operating menu and parameter description

Configuration counter

Navigation
Description

Sensor n value

Navigation
Description

Device temperature

Navigation
Navigation
88
Diagnostics → Device info. → Configuration counter
Expert → Diagnostics → Device info. → Configuration counter
Use this function to display the counter reading for changes to device parameters.
Static parameters, whose values change during optimization or configuration, cause
this parameter to increment by 1. This support parameter version management. If
several parameters change, e.g. as a result of loading parameters from FieldCare etc.
to the device, the counter can show a higher value. The counter cannot be reset and is
also not reset to the default value when the device is reset. If the counter overflows,
(16 bit), it starts again at 1.
14.2.4 "Measured values" submenu
n = Stands for the number of sensor inputs (1 and 2)
Diagnostics → Measured values → Sensor n value
Expert → Diagnostics → Measured values → Sensor n value
Use this function to display the current measured value at the sensor input.
n = Stands for the number of sensor inputs (1 and 2)
Diagnostics → Measured values → Min/max values → Sensor n min value
Expert → Diagnostics → Measured values → Min/max values → Sensor n min value
iTEMP TMT162
Endress+Hauser