Value Current Output - Endress+Hauser iTEMP TMT162 Operating Instructions Manual

Operating menu and parameter description
Display
User entry
Factory setting
Additional information

Value current output

Navigation
Additional information
Description
User entry
Factory setting
90
Measured value display ↔ C491 (current output simulation)
• Off
• On
Off
The simulation value is defined in the Value current output parameter.
Diagnostics → Simulation → Value current output
Expert → Diagnostics → Simulation → Value current output
The Current output simulation parameter must be set to On.
Use this function to set a current value for the simulation. In this way, users can verify the
correct adjustment of the current output and the correct function of downstream switching
units.
3.59 to 23.0 mA
3.58 mA
iTEMP TMT162
Endress+Hauser