Incoming Acceptance And Product Identification - Endress+Hauser iTEMP TMT162 Operating Instructions Manual

iTEMP TMT162
Endress+Hauser
3 Incoming acceptance and product
identification
3.1 Incoming acceptance
1.
Unpack the temperature transmitter carefully. Is the packaging or content damaged?
 Damaged components may not be installed as the manufacturer can otherwise
not guarantee compliance with the original safety requirements or the material
resistance, and can therefore not be held responsible for any resulting damage.
2. Is the delivery complete or is anything missing? Check the scope of delivery against
your order.
3.
DELIVERY NOTE
Does the nameplate match the ordering information on the delivery note?
4.
Are the technical documentation and all other necessary documents provided?
3.2 Product identification
The following options are available for identification of the device:
• Nameplate specifications
• Enter the serial number from the nameplate in the W@M Device Viewer
(www.endress.com/deviceviewer): All data relating to the device and an overview of
the Technical Documentation supplied with the device are displayed.

Incoming acceptance and product identification

TMT162
A0024856
A0024857
0
1
2
A0024858
9