Device Revision; Device Id; Manufacturer Id; Hart Revision - Endress+Hauser iTEMP TMT162 Operating Instructions Manual

iTEMP TMT162
Factory setting

Device revision

Navigation
Description
Display
Factory setting

Device ID

Navigation
Description
Display

Manufacturer ID

Navigation
Description
Display
Factory setting

HART revision

Navigation
Description
Endress+Hauser
0x11CE
Expert → Communication → HART info → Device revision
Use this function to view the device revision with which the device is registered with the
HART ® FieldComm Group. It is needed to assign the appropriate device description file
(DD) to the device.
4
4 (0x04)
Expert → Communication → HART info → Device ID
A unique HART identifier is saved in the device ID and used by the control systems to
identify the device. The device ID is also transmitted in command 0. The device ID is
determined unambiguously from the serial number of the device.
ID generated for specific serial number
Expert → Communication → HART info → Manufacturer ID
Expert → Diagnostics → Device information → Manufacturer ID
Use this function to view the manufacturer ID under which the device is registered with
the HART FieldComm Group.
2-digit hexadecimal number
0x0011
Expert → Communication → HART info → HART revision
Use this function to display the HART revision of the device.
Operating menu and parameter description
103