iTEMP TMT162
Current trimming 20 mA → 78
Navigation
Reset trim → 78
Navigation
Device tag → 86
Navigation
HART short tag
Navigation
Description
User entry
Factory setting
HART address
Navigation
Description
User entry
Factory setting
Endress+Hauser
Setup → Advanced setup → Current output→ Current trimming 20 mA
Expert → Output → Current trimming 20 mA
Setup → Advanced setup → Current output → Reset trim
Expert → Output → Reset trim
14.3.4
"Communication" submenu
"HART configuration" submenu
Diagnostics → Device information → Device tag
Expert → Communication → HART configuration → Device tag
Expert → Communication → HART configuration → HART short tag
Use this function to define a short tag for the measuring point.
Up to 8 alphanumeric characters (letters, numbers and special characters)
8 x ' ? '
Expert → Communication → HART configuration → HART address
Use this function to define the HART address of the device.
0 to 63
0
Operating menu and parameter description
101