Operating menu and parameter description
Actual diagnostics
Navigation
Description
Display
Additional information
Previous diagnostics 1
Navigation
Description
Display
Additional information
Operating time
Navigation
Description
Display
84
14.2
"Diagnostics" menu
All the information that describes the device, the device status and the process conditions
can be found in this group.
Diagnostics → Actual diagnostics
Expert → Diagnostics → Actual diagnostics
Use this function to display the current diagnostics message. If two or more messages
occur simultaneously, the message with the highest priority is shown on the display.
Symbol for event behavior and diagnostic event.
Example for display format:
F261-Electronics modules
Diagnostics → Previous diagnostics 1
Expert → Diagnostics → Previous diagnostics 1
Use this function to display the last diagnostics message with the highest priority.
Symbol for event behavior and diagnostic event.
Example for display format:
F261-Electronics modules
Diagnostics → Operating time
Expert → Diagnostics → Operating time
Use this function to display the length of time the device has been in operation.
Hours (h)
14.2.1
"Diagnose list" submenu
Up to 3 diagnostic messages currently pending are displayed in this submenu. If more than
3 messages are pending, the messages with the highest priority are shown on the display.
Information on diagnostics measures in the device and an overview of all the diagnostics
messages → 36.
iTEMP TMT162
Endress+Hauser