Display And Operating Elements - Endress+Hauser iTEMP TMT162 Operating Instructions Manual

iTEMP TMT162
Endress+Hauser
6.1.1

Display and operating elements

Display elements
 14 LC display of the field transmitter (backlit, attachable in 90° stages)
Item No. Function
1 Bar graph display
2 ' C aution' symbol
3 Unit display K, °F, °C or %
4 Measured value display, digit
height 20.5 mm
5 Status and information
display
6 ' C onfiguration locked' symbol
7 ' C ommunication' symbol
Local operation
NOTICE
‣
ESD - electrostatic discharge. Protect the terminals from electrostatic discharge.
Failure to observe this may result in destruction or malfunction of parts of the
electronics.
Hardware write protection and the proof test can be activated via a DIP switch or button on
the electronics module. When write protection is active, parameters cannot be modified. A
key symbol on the display indicates that the write protection is on. Write protection
prevents any write access to the parameters.
50
40 60
30 70
!
20 80
K °F °C %
10 90
100
0
Description
In increments of 10% with indicators for underranging and
overranging.
This is displayed when an error or warning occurs.
Unit display for the internal measured value displayed.
Displays the current measured value. In the event of an error
or warning, the corresponding diagnostics information is
displayed. →  36
Indicates which value is currently shown on the display. Text
can be entered for every value. In the event of an error or a
warning, the sensor input that triggered the error/warning is
also displayed where applicable, e.g. SENS1
The ' c onfiguration locked' symbol appears when configuration
is locked via the hardware or software
The communication symbol appears when HART®
communication is active.
Operating options
1
2
3
4
5
6
7
A0034101
23