Instrument Configuration - Endress+Hauser Mycom CLM 152 Operating Instructions Manual

Instrument configuration

34
7 Instrument configuration
PARAM
→ Set-up guide
→ Short operation
→ Instrument data
→ System configuration
→ Current output
→ Temperature
→ Calibrate
→ Clean function
→ Limit
functions
• Guided run through main menus
• Hold on / off,
• Relay manual mode,
• Limit parameters
• Chemoclean control
• Operating mode, sensor type, 2nd current
output
• Codes for locking
• Output contacts
• General settings
• Parameters for current outputs
• Hold with last value / fixed value
• Temperature compensation
• Temperature measurement auto. / manual
• Parameters for calibration
• Parameters for clean function
• All subgroups for
limit configuration
Mycom CLM 152
Note:
The complete menu structure is
illustrated on the back pages of this
manual for an overview.
Chapter 5.2
Chapter 6.7
Chapter 7.1
Chapter 7.2
Chapter 7.3
Chapter 7.4
Chapter 7.5
Chapter 8
Endress+Hauser