Table of Contents
Advertisement
Advanced Configuration
In This Chapter
This chapter describes all of the operating parameters that can be configured using the Access Point's HTTP interface.
•
Configuring the AP-600 Using the HTTP Interface
•
System: Configure specific system information such as system name and contact information.
•
Network:
Configure IP settings, DNS client, DHCP server, and Link Integrity.
•
Interfaces:
Configure the Access Point's interfaces: Wireless and Ethernet.
•
Management:
Configure the Access Point's management Passwords, IP Access Table, and Services.
•
Filtering:
Configure Ethernet Protocol filters, Static MAC Address filters, Advanced filters, and Port filters.
•
Alarms:
Configure the Alarm (SNMP Trap) Groups, the Alarm Host Table, and the Syslog features.
•
Bridge:
Configure the Spanning Tree Protocol, Storm Threshold protection, Intra BSS traffic, and Packet
Forwarding.
•
Security:
Configure security features such as MAC Access Control, WEP Encryption, and 802.1x.
•
RADIUS:
Configure RADIUS features such as RADIUS Access Control and Accounting.
Configuring the AP-600 Using the HTTP Interface
Follow these steps to configure an Access Point's operating settings using the HTTP interface:
1. Open a Web browser on a network computer.
1 2 7 (
1 2 7 (
1 2 7 (
1 2 7 (
The HTTP interface supports the following Web browser:
•
Microsoft Internet Explorer 5.5 or later
•
Netscape 4.x or later
2. If necessary, disable the Internet proxy settings. For Internet Explorer users, follow these steps:
–
Select Tools > Internet Options....
–
Click the Connections tab.
–
Click LAN Settings....
–
If necessary, remove the check mark from the Use a proxy server box.
–
Click OK twice to save your changes and return to Internet Explorer.
3. Enter the Access Point's IP address in the browser's Address field and press Enter.
–
Result: The Enter Network Password screen appears.
4. Enter the HTTP password in the Password field and click OK. Leave the User Name field blank. (By default, the
HTTP password is "public").
Result: The System Status screen appears.
–
4
35
Advertisement
Table of Contents
