Advanced Configuration - Proxim ORiNOCO AP-700 User Manual

Advanced Configuration

This chapter contains information on configuring settings in the following categories:
• System: Configure specific system information such as system name and contact information.
• Network: Configure IP, DNS client, DHCP server, DHCP Relay Agent, DHCP Relay Servers, Link Integrity, and SNTP
settings.
• Interfaces: Configure the Access Point's interfaces: Wireless and Ethernet. Configure the and a
System (WDS).
• Management: Configure the Access Point's management Passwords, IP Access Table, and Services such as
configuring secure or restricted access to the AP via SNMPv3, HTTPS, or CLI. Configure Secure Management, SSL,
Secure Shell (SSH), and RADIUS Based Access Management.
• Filtering: Configure Ethernet Protocol filters, Static MAC Address filters, Advanced filters, and Port filters.
• Alarms: Configure the Alarm (SNMP Trap) Groups, the Alarm Host Table, and the Syslog features.
• Bridge: Configure the Spanning Tree Protocol, Storm Threshold protection, Intra BSS traffic, and Packet Forwarding.
• QoS: Configure Wireless Multimedia Enhancements/Quality of Service parameters and QoS policies.
• Radius Profiles: Configure RADIUS features such as RADIUS Access Control and Accounting.
• PXU (ProximUnify) Profile and VLAN Roaming:
• SSID/VLAN/Security:
Access Control, WPA, 802.11i (WPA2), WEP Encryption, and 802.1x.
To configure the AP using the HTTP/HTTPS interface, you must first log in to a web browser. See
instructions.
You may also configure the AP using the command line interface. See
information.
To configure the AP via HTTP/HTTPS:
1. Click the Configure button located on the left-hand side of the screen.
Configure SSIDs, VLANs, and security profiles. Configure security features such as MAC
Set up Automatic Configuration for Static
Configure ProximUnify features to enable VLAN support.
Command Line Interface (CLI)
AP-700 User Guide
4
Wireless Distribution
IP.
Logging In for
for more
37