Table of Contents
Advertisement
Installation
Follow these steps to install an AP-600:
1. Unpack the Access Point and accessories from the shipping box.
2. If you intend to install the unit free-standing or if you intend to mount it to the ceiling, use a Phillips screwdriver to
attach the metal base to the underside of the unit. The metal base and screws are provided. See
for additional information.
Figure 2-1
Attach the Metal Base
3. Press down on the cable-cover lock located in the front-center of the unit to release the cable cover.
Figure 2-2
Unlock the Cable Cover
4. Remove the cable cover from the unit.
Installation & Basic Configuration
cable-cover lock
Mounting Options
18
Advertisement
Table of Contents
