Ethernet Interface Parameters - Proxim ORINOCO AP-600B User Manual

Name
Load Balancing
Medium Distribution
MAC Address
Supported Data Rates
Transmit Rate
Supported Frequency Channels
Physical Layer Type
Regulatory Domain List
1 2 7 ( 1 2 7 (
1 2 7 ( 1 2 7 (
There is an inter-dependent relationship between the Distance between APs and the Multicast Rate. In
general, larger systems operate a lower average transmit rates.
Distance between APs
Large
Medium
Small
Minicell
Microcell
Wireless Distribution System (WDS) Parameters (AP-600b Only)
1 2 7 ( 1 2 7 (
1 2 7 ( 1 2 7 (
At this time, WDS is not available for the AP-600a.
Name
WDS Table
Port Index
Status
Partner MAC Address

Ethernet Interface Parameters

Name
Ethernet Interface
Speed
MAC Address
Type Values
Integer enable (default)
disable
Integer enable (default)
disable
PhyAddress 12 hex digits
Octet String Reported in 500 Kb/sec
intervals:
2 (1 Mbits/sec)
4 (2 Mbits/sec) (default)
11 (5.5 Mbits/sec)
22 (11 Mbits/sec)
Integer32 Reported in 500 Kb/sec
intervals:
0 (auto fallback - default)
2 (1 Mbits/sec)
4 (2 Mbits/sec)
11 (5.5 Mbits/sec)
22 (11 Mbits/sec)
Octet String Depends on Regulatory
Domain
Integer dsss (direct sequence
spread spectrum) for
802.11b
DisplayString U.S./Canada -- FCC
Europe -- ETSI
Japan -- MKK
Multicast Rate
1 and 2 Mbits/sec
1, 2, and 5.5 Mbits/sec
1, 2, 5.5 and 11 Mbits/sec
1, 2, 5.5 and 11 Mbits/sec
1, 2, 5.5 and 11 Mbits/sec
Type Values
Table N/A
Integer 3.1 - 3.6 (Wireless)
Integer enable, disable
PhysAddress User Defined
Type Values
Group N/A
Integer 10halfduplex
10fullduplex
10autoduplex
100halfduplex
100fullduplex
autohalfduplex
autoautoduplex (default)
PhyAddress N/A
Command Line Interface (CLI)
Access CLI Parameter
RW ldbalance
RW meddendistrib
R macaddr
R suppdatarates
RW txrate
R suppchannels
R phytype
R regdomain
Access CLI Parameter
R wdstbl
R portindex
RW status
RW partnermacaddr
Access CLI Parameter
R ethernet
RW etherspeed
R ethermacaddr
117