Proxim ORINOCO AP-600B User Manual page 21

1 2 7 ( 1 2 7 (
1 2 7 ( 1 2 7 (
Once attached, the power cable locks into place. To disconnect the power cable, slide back the black plastic
fitting and gently pull the cable from the connector.
9. Connect the free end of the Ethernet cable to a hub, switch, patch panel, Active Ethernet power injector, or an
Ethernet port on a computer.
10. If using AC power, connect the power cord to a power source (such as a wall outlet) to turn on the unit.
11. Configure and test the unit. See
12. Download the latest software to the unit, if necessary. See
13. Place the unit in the final installation location. See
1 2 7 ( 1 2 7 (
1 2 7 ( 1 2 7 (
Proxim recommends that you perform a Site Survey prior to determine the installation location for your AP-600
units. For information about how to conduct a Site Survey, contact your local reseller.
14. Replace the back cover, front cover, and cable cover. Be careful to avoid trapping the power and Ethernet cables
when replacing the cable cover.
Figure 2-7 Assembled Unit
15. If desired, you can attach a Kensington lock to secure the cable cover into place. This will protect the unit from
unauthorized tampering. See
Initialization for details.
Mounting Options
Kensington Security Slot for details.
Installation & Basic Configuration
Download the Latest Software
for mounting options and instructions.
for details.
21