Proxim ORINOCO AP-600B User Manual page 122

AP-600a Only Parameters
Name
Operating Frequency Channel
2X Turbo Mode
(not available in all countries)
Supported Data Rates
Transmit Rate
Physical Layer Type
Regulatory Domain List
AP-600b Only Parameters
Name
Distance between APs
Interference Robustness
Operating Frequency Channel
Multicast Rate
Closed Wireless System
Type Values
Integer Varies by regulatory
domain and country. See
802.11a Channel
Frequencies for the
AP-600a
Integer enable
disable (default)
Octet String See Transmit Rate,
below
Integer32 Reported in 500 Kb/sec
intervals:
0 - Auto Fallback
(default)
12 (6 Mbits/sec)
18 (9 Mbits/sec)
24 (12 Mbits/sec)
36 (18 Mbits/sec)
48 (24 Mbits/sec)
72 (36 Mbits/sec)
96 (48 Mbits/sec)
108 (54 Mbits/sec)
For Turbo mode (not
available in all
countries):
0 - Auto Fallback
(default)
24 (12 Mbits/sec)
38 (18 Mbits/sec)
48 (24 Mbits/sec)
72 (36 Mbits/sec)
96 (48 Mbits/sec)
144 (72 Mbits/sec)
192 (96 Mbits/sec)
216 (108 Mbits/sec)
Integer ofdm (orthogonal
frequency division
multiplexing) for 802.11a
DisplayString FCC (5.15-5.35 GHz,
5.725-5.850 GHz)
ETSI (5.15-5.25 GHz
only)
ETSI (5.15-5.35 GHz)
MMK (5.15-5.25 GHz)
Singapore (5.15-2.25
GHz, 5.725-5.850 GHz)
Type Values
Integer large (default)
medium
small
minicell
microcell
Integer enable (default)
disable
Integer 1 - 14; available channels
vary by regulatory
domain/country; see
802.11b Channel
Frequencies for the
AP-600b
Integer 1 Mbits/sec (1)
2 Mbits/sec (2) (default)
5.5 Mbits/sec (3)
11 Mbits/sec (4)
Integer enable
disable (default)
Command Line Interface (CLI)
Access CLI Parameter
RW channel
RW turbo
R suppdatarates
RW txrate
R phytype
R regdomain
Access CLI Parameter
RW distaps
RW interrobust
RW channel
RW multrate
RW closedsys
116