Table of Contents
Advertisement
•
Group - A logical collection of network parameter information. For example, the System Group is composed of
several related parameters. Groups can also contain Tables. All items for a given Group can be displayed with a
show <Group> CLI Command.
•
Image File - The Access Point software executed from RAM. To update an Access Point you typically download a
new Image File. This file is often referred to as the "AP Image".
•
Parameter - A fundamental network value that can be displayed and may be changeable. For example, the Access
Point must have a unique IP Address and the Wireless interface must be assigned an SSID. Change parameters
with the CLI set Command, and view them with the CLI show Command.
•
Table - Tables hold parameters for several related items. For example, you can add several potential managers to
the SNMP Table. All items for a given Table can be displayed with a show <Table> CLI Command.
•
TFTP - Refers to the TFTP Server, used for file transfers.
Navigation and Special Keys
This CLI supports the following navigation and special key functions to move the cursor along the prompt line.
Key Combination
Operation
Delete or Backspace
Delete previous character
Ctrl-A
Move cursor to beginning of line
Ctrl-E
Move cursor to end of line
Ctrl-F
Move cursor forward one character
Ctrl-B
Move cursor back one character
Ctrl-D
Delete the character the cursor is on
Ctrl-U
Delete all text to left of cursor
Ctrl-P
Go to the previous line in the history buffer
Ctrl-N
Go to the next line in the history buffer
Tab
Complete the command line
?
List available commands
CLI Error Messages
The following table describes the error messages associated with improper inputs or expected CLI behavior.
Error Message
Syntax error
Invalid command
Invalid parameter name
Invalid parameter value
Invalid table index
Invalid table parameter
Invalid table parameter value
Read only parameter
Incorrect password
Download unsuccessful
Upload unsuccessful
Command Line Interface (CLI) Variations
Administrators use the CLI to control Access Point operation and monitor network statistics. The AP-600 supports two
types of CLI: the Bootloader CLI and the normal CLI. The Bootloader CLI provides a limited command set, and is used
when the current AP Image is bad or missing. The Bootloader CLI allows you to assign an IP Address and download a
new image. Once the image is downloaded and running, the Access Point uses the normal CLI. This guide covers the
normal CLI unless otherwise specified.
Description
Invalid syntax entered at the command prompt.
A non-existent command has been entered at the command prompt.
An invalid parameter name has been entered at the command prompt.
An invalid parameter value has been entered at the command prompt.
An invalid table index has been entered at the command prompt.
An invalid table parameter has been entered at the command prompt.
An invalid table parameter value has been entered at the command prompt.
User is attempting to configure a read-only parameter.
An incorrect password has been entered in the CLI login prompt.
The download operation has failed due to incorrect TFTP server IP Address or file name.
The upload operation has failed due to incorrect TFTP server IP Address or file name.
Command Line Interface (CLI)
93
Advertisement
Table of Contents
