Figure 5-1
Enter Network Password Screen
5. Click the Monitor button located on the left-hand side of the screen.
Figure 5-2
Monitor Main Screen
6. Click the tab that corresponds to the statistics you want to review. For example, click Learn Table to see the list of
nodes that the AP-600 has discovered on the network.
7. If applicable, click the Refresh
Version
From the HTTP interface, click the Monitor button and select the Version tab. The list displayed provides you with
information that may be pertinent when calling Technical Support. With this information, your Technical Support
representative can verify compatibility issues and make sure the latest software are loaded. This screen displays the
following information for each Access Point component:
•
Serial Number: The component's serial number, if applicable.
•
Component Name
•
ID: The AP-600 identifies a system component based on its ID. Each component has a unique identifier.
•
Variant: Several variants may exist of the same component (for example, a hardware component may have two
variants, one with more memory than the other).
button to update the statistics.
Monitor Information
69