Link Integrity Parameters; Interface Parameters; Wireless Interface Parameters - Proxim ORINOCO AP-600B User Manual

Link Integrity Parameters

Name
Link Integrity
Link Integrity Status
Link Integrity Poll
Interval
Link Integrity Poll
Retransmissions
Link Integrity IP Target Table
Name
Link Integrity IP Target
Table
Table Index
Target IP Address
Comment (optional)
Status (optional)

Interface Parameters

Wireless Interface Parameters

The wireless interface group parameter is wif. The interface uses table index 3.
Common Parameters to AP-600a and AP-600b
Name
Wireless Interfaces
Table Index
Network Name
Auto Channel Select (ACS)
DTIM Period
RTS/CTS Medium Reservation
MAC Address
Supported Frequency Channels
1 2 7 ( 1 2 7 ( 1 2 7 ( 1 2 7 (
For AP-600a units in Europe, Auto Channel Select is a read-only parameter; it is always enabled.
Type Values
Group N/A
Integer enable
disable (default)
Integer 500 - 15000 ms
(in increments of 500ms)
500 ms (default)
Integer 0 - 255
5 (default)
Type Values
Table N/A
Integer 1-5
IpAddress User Defined
DisplayString User Defined (up to 254
characters)
Integer enable
disable (default)
delete
Type Values
Group N/A
Integer 3
DisplayString 1 – 31 characters
My Wireless Network A
(default)
Integer enable (default)
disable
Integer 1 – 65535
1 = default
Integer 0 – 2347
Default is 2347 (off)
PhyAddress 12 hex digits
Octet String Depends on Regulatory
Domain
Command Line Interface (CLI)
Access CLI Parameter
R linkint
RW linkintstatus
RW linkintpollint
RW linkintpollretx
Access CLI Parameter
R linkinttbl
N/A index
RW ipaddr
RW cmt
RW status
Access CLI Parameter
R wif
R index
RW netname
RW autochannel
RW dtimperiod
RW medres
R macaddr
R suppchannels
115