Table of Contents
Advertisement
Figure A-8
Results of "help" CLI command
2. Complete command description and command usage can be provided by:
[Device Name]>help <command name>
[Device Name]><command name> help
history
Shows content of Command History Buffer. The Command History Buffer stores command statements entered in the
current session. To avoid re-entering long command statements, use the keyboard "up arrow" (Ctrl-P) and "down
arrow" (Ctrl-N) keys to recall previous statements from the Command History Buffer. When the desired statement
reappears, press the Enter key to execute, or you may edit the statement before executing it.
[Device Name]> history
passwd
Changes the CLI Password.
[Device Name]> passwd oldpassword newpassword newpassword
reboot
Reboots Access Point after specified number of seconds. Specify a value of 0 (zero) for immediate reboot.
[Device Name]> reboot 0
[Device Name]> reboot 30
search
Lists the parameters supported by the specified table. This list corresponds to the table information displayed in the
HTTP interface. In this example, the CLI returns the list of parameters that make up an entry in the IP Access Table.
[Device Name]> search mgmtipaccesstbl
Figure A-9
Results of "search mgmtipaccesstbl" CLI command
Command Line Interface (CLI)
98
Advertisement
Table of Contents
