Declaration Of Conformity - Proxim ORINOCO AP-600B User Manual

United States
Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the
instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the distance between the equipment and the receiver.
•
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Declaration of Conformity

Products marked with the FCC logo comply with Part 15 of FCC Regulations. Operation of the device is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference that may cause undesired operation.
Products that contain a radio transmitter are marked with FCC ID number and may also carry the FCC logo.
Caution: Exposure to Radio Frequency Radiation.
This device complies with the FCC limits regarding the exposure to electromagnetic fields, however the following antenna
installation and device operating guidelines must be satisfied:
In the case of basestation configurations and/or the use of an approved external antenna, the separation distance
between the antenna and the human body (including hands, wrists, feet and ankles) must be at least 20 cm (8 inches).
The transmitter shall not be co-located with other transmitters or antennas.
Modifications
The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved
by the manufacturer may void the user's authority to operate the equipment.
Canada
Industry Canada (IC)
This device complies with the limits for a class B digital device and conforms to Industry Canada standard ICES-003.
Products that contain a radio transmitter comply with Industry Canada standard RSS 210 and are labelled with IC
approval number.
Wireless LAN products designed according the IEEE 802.11b standard additionally comply with Industry Canada standard
RSS 139.
UL or ETL listed products conform to ANSI/UL STD.1950 and are certified to CAN/CSA STD C22.2 NO.950.
Cet appareil numérique de classe B est conforme à la norme ICES-003 de Industry Canada.
La radio sans fil de ce dispositif est conforme à la certification RSS 210 de Industry Canada et est étiquetée avec un
numéro d'approbation IC.
Les produits pour réseaux sans fil qui utilisent la norme IEEE 802.11b sont en plus conformes à la certification RSS 139
de Industry Canada.
Les produits répertoriés UL ou ETL sont conformes à ANSI/UL STD.1950 certifiés selon la norme CAN/CSA STD C22.2
NO.950.