Figure A-18 Result of "show radius" CLI Command
Configure RADIUS Accounting server
[Device Name]>set radacctbl <index> status <enable> seraddrfmt <ipaddr or name> ipaddr
<RADIUS IP address or name> port <user defined> ssecret <user defined>
responsetm <1 to 4 seconds> maxretx <1 to 10 times>
[Device Name]>show radacctbl
Figure A-19 Results of "show radacctbl" CLI command
CLI Monitoring Parameters
Using the show command with the following table parameters will display operating statistics for the AP-600 (these are
the same statistics that are described in
–
staticmp: Displays the ICMP Statistics.
–
statarptbl: Displays the IP ARP Table Statistics.
–
statbridgetbl: Displays the Learn Table.
–
statiapp: Displays the IAPP Statistics.
–
statradius: Displays the RADIUS Authentication Statistics.
–
statif: Displays information and statistics about the Ethernet and wireless interfaces.
–
stat802.11: Displays additional statistics for the wireless interfaces.
–
statethernet: Displays additional statistics for the Ethernet interface.
Monitor Information
for the HTTP Web interface).
Command Line Interface (CLI)
111