Other Parameters; Iapp Parameters; Spectralink Voip Parameters (Ap-600B Only) - Proxim ORINOCO AP-600B User Manual

Other Parameters

IAPP Parameters

Name
IAPP
IAPP Status
Periodic Announce
Interval (seconds)
Announce Response
Time
Handover Time-out
Max. Handover
Retransmissions
Send Announce
Request on Startup
1 2 7 ( 1 2 7 (
1 2 7 ( 1 2 7 (
These parameters configure the Inter Access Point Protocol (IAPP) for roaming. Leave these settings at their
default value unless a technical representative asks you to change them.

SpectraLink VoIP Parameters (AP-600b Only)

Name
Spectralink VoIP
Spectralink VoIP Status
Type Values
Group N/A
Integer enable (default)
disable
Integer 80
120 (default)
160
200
Integer 2 seconds
Integer 410 ms
512 ms (default)
614 ms
717 ms
819 ms
Integer 1 - 10 (default 4)
Integer enable (default)
disable
Type Values
Group N/A
Integer enable
disable (default)
Command Line Interface (CLI)
Access CLI Parameter
R iapp
RW iappstatus
RW iappannint
R iappannresp
RW iapphandtout
RW iapphandretx
RW iappannreqstart
Access CLI Parameter
R spectralink
RW speclinkstatus
127