Broadcast Filtering Table; Tcp/Udp Port Filtering - Proxim ORINOCO AP-600B User Manual

Broadcast Filtering Table

Name
Broadcast Filtering
Table
Index
Protocol Name
Direction
Status

TCP/UDP Port Filtering

The following parameters are used to enable/disable the Port filter feature.
Name
Port Filtering
Port Filter Status
TCP/UDP Port Filtering Table
The following parameters are used to configure TCP/UDP Port filters.
Name
Port Filtering Table
Table Index
Port Type
Port Number
Protocol Name
Interface Bitmask
Status (optional)
Type Values
Table N/A
Integer 1-5
DisplayString N/A
Integer ethertowireless
wirelesstoether
both (default)
Integer enable
disable (default)
Type Values
Group N/A
Integer enable (default)
disable
Type Values
Table N/A
N/A User Defined
(there are also 4
pre-defined indices, see
Port Number below for
more information)
Octet String TCP
UDP
TCP/UDP
Octet String User Defined
(there are also 4
pre-defined protocols:
Index 1: NetBios Name
Service – 137, Index 2:
NetBios Datagram
Service – 138, Index 3:
NetBios Session
Service – 139, Index 4:
SNMP Service – 161)
DisplayString User Defined
(there are also 4
pre-defined protocols,
see Port Number
Integer32 0 or 2 - no interfaces
(disable)
1 or 3 - Ethernet
4 or 6 - Wireless
5 or 7 - all interfaces
(default is 7)
Integer enable (default for new
entries)
disable (default for
pre-defined entries)
delete
Command Line Interface (CLI)
Access CLI Parameter
R broadcastflttbl
N/A index
R protoname
RW direction
RW status
Access CLI
R portflt
RW portfltstatus
Access CLI
R portflttbl
R index
RW porttype
RW portnum
RW protoname
above)
RW ifbitmask
RW status
121