Miscellaneous Parameters; Cli Monitoring Parameters - Proxim ORiNOCO AP-2500 User Manual

Using the Command Line Interface

Miscellaneous Parameters

Name
Miscellaneous
Partner Image
Splash Screen
Partner Image
Filename
Maximum
Subscribers Allowed
Enable PPTP
PPTP Session Idle
Timeout
Enable IPSec

CLI Monitoring Parameters

Using the "show" command with the following table parameters will display operating statistics for the AP-2500 (these
are the same statistics that are described in
– staticmp. Displays the ICMP Statistics.
– statarptbl. Displays the IP ARP Table Statistics.
– statbridgetbl. Displays the Learn Table.
– statif. Displays information and statistics about the Ethernet and wireless interfaces.
– stat802.11. Displays additional statistics for the wireless interfaces.
– statethernet. Displays additional statistics for the Ethernet interface.
– datSessionTable. Displays the Dynamic Address Translation (DAT) table.
Type Values
Group N/A
Integer disable (0)
enable (1)
DisplayString User Defined
Size(1..32)
Integer N/A
Integer disable (0)
enable (1)
Integer User Defined
Integer disable (0)
enable (1)
Monitor Information
Access CLI Parameter
R misc
RW/Reboot partnerImageOn
RW/Reboot partnerImageFileName
R maxNumSubscribers
RW/Reboot pptpOn
RW/Reboot pptpIdleTimeout
RW/Reboot ipsecOn
for the HTTP Web interface).
231