Using the Command Line Interface
CLI Monitoring Parameters
Using the "show" command with the following table parameters will display operating statistics for the AP-2500 (these
are the same statistics that are described in
–
staticmp. Displays the ICMP Statistics.
–
statarptbl. Displays the IP ARP Table Statistics.
–
statbridgetbl. Displays the Learn Table.
–
statif. Displays information and statistics about the Ethernet and wireless interfaces.
–
stat802.11. Displays additional statistics for the wireless interfaces.
–
statethernet. Displays additional statistics for the Ethernet interface.
–
datSessionTable. Displays the Dynamic Address Translation (DAT) table.
Monitor Information
for the HTTP Web interface).
254