Command Line Interface (CLI)
CLI Monitoring Parameters
CLI Monitoring Parameters
Using the show command with the following table parameters will display operating statistics for the AP (these are the
same statistics that are described in the
•
staticmp: Displays the ICMP statistics.
•
statarptbl: Displays the IP ARP Table statistics.
•
statbridgetbl: Displays the Learn Table.
•
statiapp: Displays the IAPP statistics.
•
statradius: Displays the RADIUS Authentication statistics.
•
statif: Displays information and statistics about the Ethernet and wireless interfaces.
•
stat802.11: Displays additional statistics for the wireless interfaces.
•
statethernet: Displays additional statistics for the Ethernet interface.
•
statmss: Displays station statistics and Wireless Distribution System links.
•
statmesh: Displays statistics about the Mesh network.
Monitoring
section).
AP-4000/4000M/4900M User Guide
220