Epson RC90 User Manual page 167

No. Message
3231 Above/Below was not specified.
3232 Righty/Lefty was not specified.
3233 NoFlip/Flip was specified.
3234 Port number was not specified.
3235 String type variable was not specified.
RS-232C port
3236
specified.
Network communication port number
3237
was not specified.
Communication
3238
specified.
3239 Data bit number was not specified.
3240 Stop bit number was not specified.
3241 Parity was not specified.
3242 Terminator was not specified.
3243 Hardware flow was not specified.
3244 Software flow was not specified.
3245 None was not specified.
Parameter ' O ' or ' C ' was not
3246
specified.
3247 NumAxes parameter was not specified.
3248 J4Flag value (0-1) was not specified.
3249 J6Flag value (0-127) was not specified.
3250 Array variable was not specified.
String Array
3251
specified.
3252 Device ID was not specified.
3253 I/O type was not specified.
3254 I/O bit width was not specified.
3255 ByRef was not specified.
Variable type was not specified.
3256
Condition expression does not evaluate
3257
to Boolean value.
RS232C port
3258
specified.
Network communication port number
3259
was not specified.
Language ID was not specified.
3260
Expected '.'.
3261
Vision Sequence Name was not
3262
specified.
Vision Sequence Name or Calibration
3263
Name was not specified.
Vision Property Name or Result Name
3264
was not specified.
Vision Property Name, Result Name or
3265
Object Name was not specified.
Vision Calibration Property Name was
3266
not specified.
RC90 (EPSON RC+ 7.0) Rev.4
number was not
speed was not
variable was not
Although the ByRef is specified in the
function
specified for calling.
number was not
Maintenance 9. Troubleshooting
Remedy
declaration, no ByRef
Note 1 Note 2
is
151