Epson RC90 User Manual page 140

Maintenance 9. Troubleshooting
No. Message
1503 Disconnection while executing a task.
Communication
between Remote
1504
Controller.
communication.
Communication
between Remote
1505
Controller.
communication.
1510 Out of IP Address range.
Vision communication.
1521
Initialization failed.
Vision communication.
1522
Termination failed.
Vision communication.
1523
Socket handle acquisition failed.
Vision communication.
1524
Communication failed.
Vision communication.
1526
Sending failed.
Vision communication.
1527
Failed to read from the server.
Vision communication.
1528
Option setting failed.
Vision communication.
1529
Initialization process not completed.
Vision communication.
Communication error.
1530
Communication with the server not
completed.
Vision communication.
1531
Sockets are all used.
Vision communication.
1532
Sending time-out.
Vision communication.
1533
Receiving time-out.
Vision communication.
1534
Communication error.
Communication failure.
1550
Ethernet initialization error.
Communication failure.
1551
USB initialization error.
Communication failure.
1552 Controller internal
error.
Communication failure.
1553
Invalid data is detected.
1555 Ethernet transmission error.
1556 Ethernet reception error.
1557 USB transmission error.
1558 USB reception error.
124
disconnection
Ethernet and
-
Re-establish
disconnection
RS232 and
-
Re-establish
communication
Check the connection between the
EPSON RC+7.0 and controller.
Check the connection between the
EPSON RC+7.0 and controller.
Check the connection between the
EPSON RC+7.0 and controller.
Check the connection between the
EPSON RC+7.0 and controller.
Remedy
RC90 (EPSON RC+ 7.0) Rev.4
Note 1 Note 2