Epson RC90 User Manual page 126

Maintenance 7. Maintenance Parts Replacement Procedures
(10) Mount the following on the
Controller.
(11) Mount the Top Panel. (Mounting screws ×10)
(12) Plug in the power connector. Turn ON the Controller and make sure that the Controller
starts properly without any vibration or abnormal noise.
110
M/C Signal Connector
EMERGENCY Connector
TP Connector
USB Connector
USB Memory
Ethernet Connector
I/O Connector
RS-232C Connector
RC90 (EPSON RC+ 7.0) Rev.4