7.5 MDB
(1) Turn OFF the Controller.
MDB
Removal
(2) Unplug the power connector.
(3) Remove the Top Panel. (Mounting screws ×10)
(4) Remove the output cable of each axis of the
(5) Remove the screws on the chassis side surface
(6) Pull out the MDB clamp for the upright
(7) Remove the screws on the chassis side surface
(8) Remove the MDB clamp.
(9) Pull out the MDB in the direction shown in the
RC90 (EPSON RC+ 7.0) Rev.4
Maintenance 7. Maintenance Parts Replacement Procedures
MDB.
(×4).
mounting.
(×2).
(Mounting screw ×2)
picture.
(7)
(5)
105