Epson RC90 User Manual page 137

No. Message
File failure.
1120
Setting file is corrupt.
File failure.
1121
Project file is corrupt.
File failure.
1122
Point file is corrupt.
File failure.
1123
I/O label file is corrupt.
File failure.
1124
User error file is corrupt.
File failure.
1125
Error message file is corrupt.
File failure.
1126 Software option
corrupt.
File failure.
1127
Vision file is corrupt.
File failure.
1128
Backup information file is corrupt.
Error message failure.
1130
No item is found in the error history.
1131 Cannot access the USB memory.
File failure.
1132
Failed to copy the file.
File failure.
1133
Failed to delete the file.
File failure.
1134
GUI Builder file is corrupt.
File failure.
1135
The name of Playback is invalid.
File failure.
1140
Failed to open the object file.
File failure.
1141
Failed to open the project file.
File failure.
1142
Failed to read the project file.
File failure.
1143
Failed to open the condition save file.
File failure.
1144
Failed to write the condition save file.
File failure.
1145
Failed to open the conveyor file.
File failure.
1146
Failed to read the conveyor file.
File failure.
1150
Error history is invalid.
File failure.
1151
Failed to map the error history.
File failure.
1152
Failed to open the error history file.
RC90 (EPSON RC+ 7.0) Rev.4
Restore the controller configuration.
Rebuild the project.
Rebuild the project.
Rebuild the project.
Rebuild the project.
information is
Rebuild the project.
Insert the USB memory properly. When
this error still occurs after the USB
memory
memory may be unrecognizable to
controller.
check the operation.
Rebuild the project.
Maintenance 9. Troubleshooting
Remedy
is inserted properly, the
Insert another memory to
Note 1 Note 2
121