Thermo Scientific DCS4 Manual page 83

Issue: 1.78
Dosimetry
EEPROM
Electronic Personal
Dosemeter
EMDS
Emergency Mode
Emergency TLD
Employees
EPD Issue
Entry Mode
Entry Process
EPD
EPD Reader
ERN
Exception
Exercise Mode
Exit Mode
Exit Process
FAT
FB
FBN
Thermo Fisher Scientific
The accurate measurement of radiation dose.
Electrically Erasable Read Only Memory
The electronic devices carried by Workers to measure dose.
EPD Maintenance Database System - Thermo Product Name
Mode of running DCS4 when an Emergency occurs
TLD used during Emergency
Individuals who belong to Departments which have ID
numbers less than 5000
Another term for Visit.
An Access Control Terminal set up to perform an Entry
Process.
The process by which an Access Control Terminal controls
entry to the Radiologically Controlled Area. It checks that a
Worker's Primary and/or Secondary ID, the Task number and
the EPD they present are valid, and that the worker has
sufficient Dose in Hand for the task, and then loads the EPD
with the appropriate Alarm Thresholds and records in the
database the worker's entry to the RCA.
Electronic Personal Dosemeter
Thermo EPD Reader for reading data from and writing data to
an EPD.
Engineering Release Note
Any event which causes any message marked "Log as
Exception" to be displayed by an Access Control Terminal
Simulates Accident/Emergency Mode
An Access Control Terminal set up to perform an Exit Process.
The process by which an Access Control Terminal records the
completion of a Worker's visit to the Radiologically Controlled
Area. It records in the database the Doses measured by the
EPD and clears the EPD memory.
Factory Acceptance Testing
Full Beta
Film Badge Number
A Guide to Using DCS4 Access Control Workstation
Glossary of Terms
10-3