Thermo Scientific DCS4 Manual page 57

Issue: 1.78
The System
Administrator sets the
Hide PIN in the
Configuration
program (see A Guide
to Using DCS4 ACW
Manager Ref No.
EPD/MHB/61064/000)
.
The System
Administrator sets the
Hide PIN in the
Configuration
program (see A Guide
to Using DCS4 ACW
Manager Ref No.
EPD/MHB/61064/000)
.
Thermo Fisher Scientific
Note that the picture above displays the Escort's Primary ID. If
the Hide PIN is selected, the Escort's Primary ID is displayed
as follows:
If the Secondary ID option is enabled in the System Setup (see
A Guide to Using DCS4 Data Management and Reporting Ref
No. EPD/MHB/61066/000), the Escort shall be asked to
confirm their identity by entering their Secondary ID.
If the Escort's Secondary ID is entered through the keypad, the
following screen will appear echoing the characters as they are
typed in:
Note: The System Administrator can disable the keypad entry
of the PIN. See A Guide to Using DCS4 System Administrator
Ref No. EPD/MHB/61065/000 for more information.
Note that the picture above displays the Escort's Secondary ID.
If the Hide PIN is selected, the Escort's Secondary ID is
displayed as follows:
When the Escort details have been validated, the following
confirmation message is displayed:
Using the ACW for Task Transfer
A Guide to Using DCS4 Access Control Workstation 6-7