Thermo Scientific DCS4 Manual page 18

Introduction to the Access Control Workstation
3-2 A Guide to Using DCS4 Access Control Workstation
 Dose Display (see
(page 7-1)), which displays last visit dose, current
month dose and current year dose for any individual.
Note: The Dose Display option may not be selected on
its own.
 Change PIN (see
(page 8-1)) allows the Worker to change their current
PIN (Personal Identification Number).
 Load Additional Tasks (see
Loading Tasks into the EPD (page
Worker to load Additional Tasks into the EPD
Scratchpad for use with a Thermo ACT6.
See Access Control Terminal (ACT6) Handbook Ref No.
EPD/MHB/45150/000 or contact Thermo Electron
Corporation EPD Support for assistance.
 Multipurpose Mode, offering any combination of the
above six processes. The only difference in operation is
that each worker must first select the process they need.
 Auto Entry/Exit Mode, which automatically
recognises whether the user is entering the RCA or
exiting the RCA (depending on whether the system has
a record of the user in the RCA or not). The Entry or
Exit Modes are as described above.
Using the ACW for Dose Display
Using the ACW for Changing PIN
Using the ACW for
9-1)) enables the
Issue: 1.78
Thermo Fisher Scientific