Notes Regarding Error Messages During The Load Tasks Process - Thermo Scientific DCS4 Manual

Issue: 1.78
Notes regarding Error
Messages during the Load
Tasks Process
Thermo Fisher Scientific
During the Load Tasks Process, the ACW will perform certain
checks. Typical checks include worker authorisation, Task ID
validity as well as other system and EPD checks.
If any of these checks are not satisfied then the process will be
aborted and an error message will be displayed
The error message consists of an Error Code Number and some
descriptive text. The System Administrator may change the
text, but the error Code Number will be the same (see A Guide
to Using DCS4 System Administrator Ref No.
EPD/MHB/61065/000 for further information).
To assist the Health Physicist in identifying the problem, make
a note of the Error Number (in brackets).
Using the ACW for Loading Tasks into the EPD
A Guide to Using DCS4 Access Control Workstation 9-9