Thermo Scientific DCS4 Manual page 16

Introduction to DCS4
2-4 A Guide to Using DCS4 Access Control Workstation
Other information can be displayed on the LCD by operating
the rubber control button(s), as described in the Technical
Handbooks. However, you should note that the EPD is
configurable for many different applications, and some
irrelevant features may have been switched off.
The EPD Mk2 communicates with the Reader in an ACT using
the IRDA situated at either side of the button.
The set-up for EPD Mk2 can be programmed using the "Easy
EPD" program or the "EMDS2" program described in separate
manuals (see Other Manuals (page 1-2)
Issue: 1.78
for details).
Thermo Fisher Scientific