Reading Dose Profile - Thermo Scientific DCS4 Manual

Using the ACW for RCA Exit

Reading Dose Profile

Clearing the EPD
5-6 A Guide to Using DCS4 Access Control Workstation
The Dose Profile is read from the EPD under the following
conditions:
 Always Collect Dose Profile is enabled in the System
Setup (see EPD Settings in A Guide to Using DCS4
Data Management and Reporting Ref No.
EPD/MHB/61066/000)
 Always Collect Dose Profile is enabled for the Task
(only in On-Line Mode) (see To setup Task Alarm data
for a specified Task in A Guide to Using DCS4 Data
Management and Reporting Ref No.
EPD/MHB/61066/000)
 There is a problem with the EPD
 One of the Dose or Rate alarms has activated during the
Visit
If the Exit Process has been successfully completed, the
following message is displayed, indicating the User Name,
PIN, Task Description and Number while the EPD is being
cleared:
Issue: 1.78
Thermo Fisher Scientific