Using the ACW for RCA Entry
The Worker enters
their Secondary ID
according to the
System Setup (see
Notes regarding
Worker ID input (page
4-8)).
The System
Administrator sets the
Hide PIN in the
Configuration
program (see A Guide
to Using DCS4 ACW
Manager Ref No.
EPD/MHB/61064/000)
.
Secondary ID Error Messages
4-6
A Guide to Using DCS4 Access Control Workstation
If the Secondary ID is entered through the keypad, the
following screen will appear echoing the characters as they are
typed in:
Note: The System Administrator can disable the keypad entry
of the Second ID. See A Guide to Using DCS4 System
Administrator Ref No. EPD/MHB/61065/000 for more
information.
Note that the picture above displays the Worker's Secondary
ID. If the Hide PIN is selected, the Worker's Secondary ID is
displayed as follows:
If the Secondary ID is invalid or inactive you will be informed
that the Secondary ID is not recognised and the system will
advise you check your ID:
Issue: 1.78
Thermo Fisher Scientific