Thermo Scientific DCS4 Manual page 36

Using the ACW for RCA Entry
Entering the Task Number
The Worker enters
their Task ID
according to the
System Setup (see
Notes regarding Task
ID input (page 4-14)).
The System
Administrator sets the
Hide PIN in the
Configuration
program (see A Guide
to Using DCS4 ACW
Manager Ref No.
EPD/MHB/61064/000)
.
Task Error Messages
4-12 A Guide to Using DCS4 Access Control Workstation
The Worker enters their Task ID (see
Prompt Types (page 4-7).)
Note that the picture above does not show the Worker's PIN as
the Hide PIN is selected. If the Hide PIN is not selected, the
Worker's PIN is displayed as follows:
If the Task ID is entered through the keypad, the following
screen will appear echoing the characters as they are typed in:
If the Task ID is invalid or inactive you will be informed that
the Task ID is invalid and the system will advise you to re-
insert your EPD.
Issue: 1.78
Notes regarding Worker
Thermo Fisher Scientific