Has Worker Been Briefed - Thermo Scientific DCS4 Manual

Issue: 1.78
The System
Administrator sets the
Hide PIN in the
Configuration
program (see A Guide
to Using DCS4 ACW
Manager Ref No.
EPD/MHB/61064/000)
.
Task Error Messages

Has Worker been Briefed

Thermo Fisher Scientific
Note that the picture above does not show the Worker's PIN as
the Hide PIN is selected. If the Hide PIN is not selected, the
Worker's PIN is displayed as follows:
If the Task ID is entered through the keypad, the following
screen will appear echoing the characters as they are typed in:
If the Task ID is invalid or inactive you will be informed that
the Task ID is invalid and the system will advise you to re-
insert your EPD.
If the Confirm Task Accept option is enabled, the Worker shall
be asked if they have been fully briefed, as follows:
Using the ACW for Loading Tasks into the EPD
A Guide to Using DCS4 Access Control Workstation 9-5