Notes Regarding Task Id Input - Thermo Scientific DCS4 Manual

Using the ACW for RCA Entry
Notes regarding Task ID
input
Has Worker been Briefed
4-14 A Guide to Using DCS4 Access Control Workstation
Select "4" will display Tasks associated with Project 3011:
The system will continue to filter the tasks according the Task
setup (see A Guide to Using DCS4 Data Management and
Reporting Ref No. EPD/MHB/61066/000 for further
information regarding Tasks and Task Fields).
The Task ID is entered either using the keypad or by using a
COTAG badge reader or by swiping a Security Badge through
the bar-code scanner on the ACW. These options are selected
in the System setup (see A Guide to Using DCS4 Data
Management and Reporting Ref No. EPD/MHB/61066/000 for
more information).
The System Administrator can disable the keypad entry of the
Task (see A Guide to Using DCS4 System Administrator Ref
No. EPD/MHB/61065/000 for more information).
If the Confirm Task Accept option is enabled, the Worker shall
be asked if they have been fully briefed, as follows:
Issue: 1.78
Thermo Fisher Scientific