Selecting The Change Pin Process - Thermo Scientific DCS4 Manual

Using the ACW for Changing PIN
Selecting the Change PIN
Process
Identifying the Worker
Entering Primary ID during
the Change PIN Process
The Worker enters
their Primary ID
according to the
System Setup (see
Notes regarding
Worker ID Input (page
4-8)).
Primary ID Error Messages
8-2 A Guide to Using DCS4 Access Control Workstation
Select the Change PIN Process from the menu using the
Up/Down buttons and 'ENT'.
The Worker is now prompted for their Worker details:
The Worker identifies themselves by entering their Primary ID
(see Notes regarding Worker Prompt Types (page
If the Primary ID is entered through the keypad, the following
screen will appear echoing the characters as they are typed in:
The System Administrator can disable the keypad entry of the
Primary ID. See A Guide to Using DCS4 System Administrator
Ref No. EPD/MHB/61065/000 for more information.
If the Primary ID is invalid or inactive you will be informed
that the Primary ID is not recognised and the system will advise
you to contact Health Physics:
Issue: 1.78
4-7)).
Thermo Fisher Scientific