Has Worker Been Briefed - Thermo Scientific DCS4 Manual

Issue: 1.78

Has Worker been Briefed

The System
Administrator sets the
Hide PIN in the
Configuration
program (see A Guide
to Using DCS4 ACW
Manager Ref No.
EPD/MHB/61064/000)
.
Mailbox Message
Thermo Fisher Scientific
If the Confirm Task Accept option is enabled, the Worker shall
be asked to if they have been fully briefed, as follows:
Note that the picture above does not show the Worker's PIN as
the Hide PIN is selected. If the Hide PIN is not selected, the
Worker's PIN is displayed as follows:
If the Worker selects 'Yes', the Transfer Process shall continue.
If the Worker selects 'No', transfer shall be denied as follows:
If a mailbox message has been created for the selected, the
message is displayed as follows:
Using the ACW for Task Transfer
A Guide to Using DCS4 Access Control Workstation 6-9