Displaying The Dose - Thermo Scientific DCS4 Manual

Issue: 1.78
Primary ID Error Messages

Displaying the Dose

The System
Administrator sets the
Hide PIN in the
Configuration
program (see A Guide
to Using DCS4 ACW
Manager Ref No.
EPD/MHB/61064/000)
.
Thermo Fisher Scientific
If the Primary ID is invalid or inactive you will be informed
that the Primary ID is not recognised and the system will advise
you to contact Health Physics:
If the Display Dose on Issue option is enabled, the worker's
Dose Details will be displayed as follows:
Note that the picture above does not show the Worker's PIN as
the Hide PIN is selected. If the Hide PIN is not selected, the
Worker's PIN is displayed as follows:
Note: If the ACW is in On-Line Mode, the current Shift Dose
is displayed. If the ACW is in Local Mode, the Shift Dose is
blank.
Select the Enter button to move to the next window (or wait for
the automatic timeout).
Using the ACW for Task Transfer
A Guide to Using DCS4 Access Control Workstation 6-5