Clearing And Re-Issuing The Epd - Thermo Scientific DCS4 Manual

Issue: 1.78
Clearing and Re-issuing
the EPD
The System
Administrator sets the
Hide PIN in the
Configuration
program (see A Guide
to Using DCS4 ACW
Manager Ref No.
EPD/MHB/61064/000)
.
Thermo Fisher Scientific
If the Transfer Process has been successfully completed, the
following message is displayed, indicating the User Name,
PIN, Task Description and Number while the EPD is being
cleared and re-issued:
Note that the picture above does not show the Worker's PIN as
the Hide PIN is selected. If the Hide PIN is not selected, the
Worker's PIN is displayed as follows:
When the EPD has been successfully cleared and re-issued,
the following Issue message is displayed indicating that the
user may proceed:
Using the ACW for Task Transfer
A Guide to Using DCS4 Access Control Workstation 6-11