Selecting The Dose Display Process - Thermo Scientific DCS4 Manual

Using the ACW for Dose Display
Selecting the Dose Display
Process
Identifying the Worker
Entering Primary ID
The Worker enters
their Primary ID
according to the
System Setup (see
Notes regarding
Worker ID Input (page
4-8)).
7-2 A Guide to Using DCS4 Access Control Workstation
Throughout this manual, the Initials option has been set.
See A Guide to Using DCS4 Data Management and Reporting
Ref No. EPD/MHB/61066/000 for further information.
Select the Dose Display Process from the menu using the
Up/Down buttons and 'ENT'.
The Worker is now prompted for their Worker details:
The Worker identifies themselves by entering their Primary ID
(see Notes regarding Worker Prompt Types (page
If the Primary ID is entered through the keypad, the following
screen will appear echoing the characters as they are typed in:
The System Administrator can disable the keypad entry of the
Primary ID. See A Guide to Using DCS4 System Administrator
Ref No. EPD/MHB/61065/000 for more information.
Issue: 1.78
4-7)).
Thermo Fisher Scientific