Epd Prompt - Thermo Scientific DCS4 Manual

Issue: 1.78

EPD Prompt

Read Error Messages
Identifying the Worker
Thermo Fisher Scientific
When the ACW is available for RCA Exit, a message (similar
to the one below) is displayed on the screen:
The Exit Process is initiated by inserting an EPD into the
ACW.
If the EPD cannot be read, an error message is displayed:
If the No Primary ID required on Exit is enabled as a
Configuration option (see A Guide to Using DCS4 ACW
Manager Ref No. EPD/MHB/61064/000), the Worker's Primary
ID is read directly from information stored in the EPD.
Otherwise the Worker is now prompted for their Worker
details:
Using the ACW for RCA Exit
A Guide to Using DCS4 Access Control Workstation 5-3