Note Regarding The Display Of Worker Details At The Acw - Thermo Scientific DCS4 Manual

Using the ACW for RCA Entry
Note regarding the display
of Worker details at the
ACW
4-2 A Guide to Using DCS4 Access Control Workstation
3. Entering the Worker details – see
Worker (page
4. If the Display Dose on Issue option is enabled in the
ACW Configuration (see A Guide to Using DCS4
System Administrator Ref No. EPD/MHB/61065/000),
the Worker's Dose is displayed – see
Dose (page 4-8).
5. If the RCA Escorts option is enabled in the System
Setup AND Escort Required is enabled for the Worker
(see A Guide to Using DCS4 Data Management and
Reporting Ref No. EPD/MHB/61066/000), the Escort
Details are entered – see
6. If Legal Badges must be shown at ACW is enable in the
System Setup (see A Guide to Using DCS4 Data
Management and Reporting Ref No.
EPD/MHB/61066/000), the Legal badge is presented –
see Present the Legal Badge (page
7. Entering the Task details – see
(page 4-11).
8. If the Confirm Task Accept option is enabled in the
System Setup (see A Guide to Using DCS4 Data
Management and Reporting Ref No.
EPD/MHB/61066/000), the Worker Briefed message is
displayed – see
9. If a Mailbox message has been created for the selected
task, the message is displayed – see
(page 4-15).
10. The EPD is issued – see
If Display Forename1 instead of Initials at ACW is ticked on
the System Configuration tab of the System Setup screen, the
Worker's name will be displayed as follows:
If Display Forename1 instead of Initials at ACW is NOT ticked
on the System Configuration tab of the System Setup screen,
the Worker's name will be displayed as follows:
Throughout this manual, the Initials option has been set.
See A Guide to Using DCS4 Data Management and Reporting
Ref No. EPD/MHB/61066/000 for further information.
Identifying the
4-4).
Escort Details (page
4-11).
Identifying the Task
Has Worker been Briefed (page
Issuing the EPD (page
Issue: 1.78
Displaying the
4-9).
4-14).
Mailbox Message
4-16).
Thermo Fisher Scientific