Using The Acw Keypad And Reader - Thermo Scientific DCS4 Manual

Issue: 1.78
ACW Buttons
ACW Menus
Thermo Fisher Scientific

Using the ACW Keypad and Reader

Most operations on the ACW require you to enter codes (using
the keypad numbers) and select options using 'buttons' shown
on the display screen. Screen buttons are 'pressed' (activated)
by selecting them with the keypad arrow keys then pressing the
keypad 'ENT' key.
7 8
4 5
1 2
* 0
CLR
When an ACW has been configured to allow several processes,
menu items are selected by using the 'arrow keys' on the
keypad
Note: Selection is made using the arrow keys on the keypad
and pressing the 'ENT' key when the selection is made. In the
example below, the Exit process will be selected.
Introduction to the Access Control Workstation
9
6
3
#
ENT
A Guide to Using DCS4 Access Control Workstation 3-3