Table of Contents
Advertisement
4
BIIS OPERATION
Default setting
The following functions are assigned to each programmable
key as the default. However, the assigned function can be
changed by your dealer. Ask your dealer for details.
NOTE: [TX Code Enter] must be assigned to any key.
[P0]; Call
[P1]; Digital
[P3]; TX Code Enter
[UP]/[DOWN]; CH Up/Down
[MONITOR]; Moni(Audi): Push this key after the communica-
[P2]/[RED]; Null
16
: Push to transmit a 5-tone/BIIS call
when the selected channel is a 5-
tone or MSK channel, respectively.
: Push to select the call list ID/trans-
mit message, or to display the
receive message record for selec-
tion.
: Push to enter the direct ID code edit
mode for both 5-tone and MSK.
: While in the standby condition,
selects the operating channel.
After pushing [Digital] or [TX Code
CH Select], selects call list or TX
code channel, respectively.
tion to send a 'Clear down' signal
during MSK channel operation.
: No function is assigned.
Receiving a call
D D Individual call
q When an individual call is received;
• Beeps sound.
• " " appears and the mute is released.
• The programmed text message (e.g."
station ID (or text) is displayed alternately, depending on the set-
ting.
• "
" appears or blinks depending on the setting.
Appears
w Push and hold [PTT], then speak into the microphone at a
normal voice level.
• "
" indicator appears.
e Release [PTT] to return to receive.
• "
" appears while receiving a signal.
r To finish the conversation, push [MONITOR] (Moni(Audi))
to send the 'Clear down' signal.
• Either station can send a 'Clear down' signal.
• "
" is displayed for 2 sec. (approx.).
• " " disappears and the transceiver returns to the standby condi-
tion.
") and the calling
Appears or blinks
Advertisement
Table of Contents
